Table of Contents

JRP Printer Setup

For adding JRP Printer follow these steps:

  1. Open Printers by clicking the Start button , clicking Control Panel, clicking Hardware and Sound, and then clicking Printers or by clicking Start button → Devices and Printers
  2. Click Add a printer.
  3. In the Add Printer Wizard, select Add a local printer.
  4. On the Choose a printer port page, select the Create a new port option button and the Standart TCP/IP Port, and then click Next.
  5. For the Hostname or IP address, enter the exact IP address of the printer and click Next. For JTB Finland IP address is 10.60.70.192
  6. On the Additional port information required page, make sure that the Standart option button and the Generic Network Card are selected, and then click Next
  7. On the Install the printer driver page click Have Disk button, on the Install from disk dialog window click Browse…, enter the path for File name. For JTB Finland the path is \\travelwise-hel. Then click Open. Select JRPPrinterDrivers folder and then the version of your operation system, select drievr file and click Open. For JTB Finland driver fiel is ECSP605.INF. On the Install from disk dialog window click OK, on the Install the printer driver page click Next.
  8. As a printer name enter JRPPrinter.
  9. Select option Do not share this printer → Next.
  10. Finish
  11. Make sure the JRPPrinter is not set as your default printer.

For setting up JRPPrinter:

  1. Open Printer Preferences from the context menu.
  2. On the JRPPrinter Printing Preferences go to the User Defined Paper tab and add new paper 'JRP blank':
  3. On the Extention Settings tab set up vertical offset:
  4. On the Layout tab click Advanced… and select JRP Blank for a Paper Size:
  5. Open an order with JRP segment in TravelWise → make a report preview and click Print button
  6. Make the following printing settings: